KPF Cynagard 215A

Amensolar (Suzhou) New Energy Technology Co., Ltd.
Capas: PVDF / PET
Región : China China
Nota: Su Consulta se enviará directamente a Amensolar (Suzhou) New Energy Technology Co., Ltd..

Descripcion:

(Fluro-skin ® ) one step filming technology. Using Fluorine resin mix with TiO2 and directly coated on PET. Then, you can see a white thin film formed – Fluro skin.It firmly adhere with PET without need to use adhesive chemical. – environmental friendly.

Características del Producto

Características del Producto  
Capa Exterior (Aire) PVDF
Espesor de la Capa Exterior (Aire) 22.5 µm
Capa Media 1 PET
Capa Media 1 Grosor 262 µm
Espesor Total 300.5±30 µm
Color de la Capa Exterior (Aire) Blanco, Transparente
Color de la Capa Interior (Celda) Blanco, Transparente
Características de Estabilidad  
Resistencia a la Tracción (Largo/MD) 100 Mpa
Resistencia a la Tracción (Ancho/TD) 100 Mpa
Elongación (Largo/MD) 140 %
Elongación (Ancho/TD) 110 %
Resistencia Entre Capas ≥4 N/cm
Resistencia al Pelado (EVA-Lamina Posterior) ≥40 N/cm
Contracción Térmica (Largo/MD) ≤1.5 %
Contracción Térmica (Ancho/TD) ≤1.5 %
Tasa de Tramision de Humedad de Vapor (MVTR) ≤2 g/m2por día
Caracteristicas Ópticas y Termicas  
Voltaje de Descarga Parcial ≥1000 VDC
Tensión de Ruptura ≥16 kV

  lower melting point :Main material is polyethylene,melting point of polyethylene is low(120℃),the melting point of inner non-crosslinking EVA is lower 90℃  

 It is a thermoplastic material,  it  shrink and deform when heat subjected.

It is a heat insulation material 

 The adhesive layer which use for compound is insulation material

 The current conventional E film can not fulfill UV 130KWhr spec ,  it as low as to 90KWhr。

+ strong bonding with EVA:over 80N/cm

+ High UV resistance: 260Kwh irradiation

  Yellowing index △b <3 ,

+ Good UV blocking:  2um thicknes can block 280nm~380nm up to 99.45%(Integrating sphere method)     

UV resistance :   Same to T and  K  :  Better uv resistance and partial discharge

High heat dissipation,  :  35% higher than TPT/TPE :  Better  long term module efficiency

High heat resistance: RTI 120℃   :  Longer Heat aging  

Easy to rework:     EVA No residual film    :   lower manufacturing costs


Amensolar (Suzhou) New Energy Technology Co., Ltd.

No. 209, Zhuyuan Road, High Tech Zone, Suzhou, Jiangsu
Enviar mensaje a un proveedor

Contactos Útiles

Contact Face
赵成龙
Contact Face
陆卫
Contact Face
Evelyn
Contact Face
Sam
Contact Face
vivian
Contact Face
程春燕
Contact Face
黄维祯
Contact Face
仲继鹏

5 mas series de Amensolar (Suzhou) New Energy Technology Co., Ltd.

  • KPf Cynagard465A(R)
    PVDF / PET / Polyolefin
  • KPK Cynagard 09100
    PVDF / PET / PVDF
  • 1500V
    PVDF / PET
  • Black KPf Cynagard 225A(B)
    PVDF / PET / Coating
  • MPM Cynagard115E(T)
    Polyolefin / PET / Polyolefin